Pipeline fitting Spirax Sarco

Separators

Separators remove condensate from the steam system. Getting into the separator, condensate is separated from the steam and drained. Thus, steam delivered to the consumer with a high degree of dryness, which is especially important for heat-stressed equipment or equipment for direct injection of steam. DN 15 to 350, pressure up 25 bar. Material – cast iron, cast iron with spheroidal graphite, carbon steel, Stainless Steel.

Butterfly Valves

When you need a sturdy pair off consumers, a wide selection of rotary valves Spayraks Sarko can solve this problem. There are also automatic control valve. DN 40 to 250, pressure up 20 bar. Material – cast iron with spheroidal graphite, landing – metal to metal or metal to plastic.

Check valves

To prevent backward flow in pipelines are reliable and simple to maintain the check valves. Installed on the pipe or between the flanges, either by a threaded connection. DN 15 to 100, pressure up 40 bar. Material – bronze or stainless steel.

Ball Valves

Manual or pneumatic. Flange – DN 15 to 100. Threaded – 1/4″ up to 2″. Pressure up 62 bar. Material – steel, Stainless Steel.

Shut-off valves with bellows seal

Best suited for high pressure and temperature. DN 15 to 300, pressure up 40 bar. Material – cast iron, cast iron with spheroidal graphite, carbon steel, Stainless Steel. Compounds – flanged, threaded or compression fittings.

The valve blocks

Compact valve blocks for steam distribution systems, satellite steam lines, etc.. The building blocks consist of 4, 8-and 12-year-piston valves.

Filters

Filters – mudguards with flanged or threaded connections. DN 15 to 250, pressure up 64 bar. Material – bronze, cast iron, steel, Stainless Steel.

Cmotrovye glass, Check Valves, manometers

A wide selection of listed equipment.

Vents and vacuum breakers

For use in steam and water systems. DN 15 to 25. Material – brass, carbon steel, Stainless Steel.

Of washing station

Perfect equipment for washing and cleaning. Hot water obtained economical and safe mixing of cold water and steam.

Drainage system

Based on the well established principle float steam trap, they are designed for removing liquid from gas systems, for example, Compressed air, hydrocarbon compounds and the like.

Diffusers

When setting for steam traps significantly reduce the noise level in the formation of vapor, ensure the safety of personnel.